Servo Injectable Dry Powder Filling Machine
Product Details:
Product Description
Note: Our offered machine is available in different specifications and sizes in order to suit the demands of esteemed clients.
Schematic Machine working:
- The Powder Filling & Rubber Stoppering M/c is having vari-speed S.S. Slat chain Conveyor with optional Turn Table at in-feed & out-feed.
- When the machine starts Vials are feed from Turn Table. Product wheel will separate the vials, Powder is comes from the Hopper, Suck by Filling wheel & then fill in to vial by piston assembly fitted in Filling Wheel.
- Now, filled vials are travel to Stopping Station, Rubber stopper are comes from the hopper by chute one by one with the help of vibratory system. Rubber stopper puts on vials & press wheel are press the stopper on vials. Now, Filled & Stopper vials are goes to discharge end.
Technical specifications:
Machine Name | Automatic Servo Dry Powder Filling Machine |
Model | NKPF-120S |
Filling Speed | 120 Vials/minute based on 5-10ml vial for Single Dosage |
Servo Motor | 800 W Servo Motor with driver |
Design | Left to Right |
Dosage | 50 mg to 1.5 grams. Single Dose (with Change Parts) |
Vial Diameter | 25 mm To 45 mm Max |
Vial Height | 75 mm Maximum. |
Rubber Stopper | 20 mm Diameter |
Dosing wheel | One |
Dosing port / Wheel | 8 Nos |
Fill Accuracy | ±2% depending upon consistency and uniformity of bulk density of injectable powder |
Product Conveyor | 50 mm (2") wide delrin conveyor |
Powder Suction | Through Vacuum |
Powder Delivered | Through Air/Nitrogen (Customer to Provide) |
Stopper Delivered | Through Vibratory Bowl & Chute |
Machine Dimension | 1830 (mm) X 915 (mm) X 1600 (mm) |
Other Products in 'Injectable Dry Powder Filling Machine' category
N K INDUSTRIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |